![]() ![]() ![]() Can be run from a hard drive, USB Flash drives, Network Share, etc.Completely Portable - No installation needed.Very fast! Most tests are less than 1 minute.Compatible with LST Server (v1.5 or later) for real network performance results without hard drive limitations – Even test your WAN (Internet) speed with LST Server.Test the speed of your local drives (USB Drives, hard drives, etc.).Test the speed of your Local Network by testing to/from network shared folders.Some of LAN Speed Test v4 features include. ![]() You'll find that LAN Speed Test will quickly become one of your favorite network tools! For more advanced users, you can test to LAN Speed Test Server instead of a shared folder to take the slower hard drives out of the process as you are testing from one computer's RAM to another computer's RAM. Next, LAN Speed Test builds a file in memory, then transfers it both ways (without effects of Windows/Mac file caching) while keeping track of the time, and then does the calculations for you. to test the drive speed, or a shared folder on your network to test your network speed. This folder can be on a local drive or USB drive, etc. LAN Speed Test was designed from the ground up to be a simple but powerful tool for measuring file transfer, hard drive, USB Drive, and Local Area Network (LAN) speeds (wired & wireless). only some of the more advanced features are disabled. LAN Speed Test (Lite) is fully functional with no time limits, etc. You are now connected to the Wired Ethernet network.After installing LAN Speed Test v4, it begins in (Lite) mode.You will be prompted with a Network Security Alert dialogue box.Enter your Stonehill username and password. After a moment, you will be prompted with a Windows Security Sign in screen.Once your computer restarts, reconnect the Ethernet cable.Enter your username and password and click OK.Select Specify authentication mode, then click the down arrow and select User authentication.Then, click the Additional Settings button when you return to the Ethernet Properties window.At the bottom of the window, select Enable Fast Reconnect. In the Protected EAP Properties window, select Verify the server's identity by validating the certificate.Click on the Settings button next to Microsoft: Protected EAP (PEAP).On the Ethernet Properties window that opens, select the Authentication tab.Right-click on your Ethernet adapter and select Properties.In the Status window, double-click on Change adapter options.In the Windows Settings window, double-click on the Network & Internet icon.Click the Start button and then select the Settings gear icon. Next, you need to configure the Ethernet port for Authentication.Once the service has started, click the Apply button, then click the OK button.This will start the Wired AutoConfig service.Select Automatic from the Startup type drop-down menu.Scroll down until you find Wired AutoConfig and double-click on it.Click within the Search window and type in " Services," and select Services from the Best match menu.Unplug the Ethernet cable from your computer.This process involves a lot of steps, but you only need to perform it once. NOTE: To connect via Ethernet you'll need to enable 802.1X protocol, which is disabled by default in Window 10. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |